Managed Object - HostVsanSystem(vim.host.VsanSystem)

Property of
HostConfigManager
See also
HostMaintenanceSpec, HostScsiDisk, VsanHostClusterStatus, VsanHostConfigInfo, VsanHostDiskMapping, VsanHostDiskMapResult, VsanHostDiskResult
Since
vSphere API 5.5


Managed Object Description

The VsanSystem managed object type exposes VSAN configuration primitives and serves as a host-level access point for relevant VSAN data objects.

Properties

Name Type Description
config PVsanHostConfigInfo

The current VSAN service configuration information for this host.
P Required privilege: System.Read

Methods

Methods defined in this Managed Object
AddDisks_Task, EvacuateVsanNode_Task, InitializeDisks_Task, QueryDisksForVsan, QueryHostStatus, RecommissionVsanNode_Task, RemoveDisk_Task, RemoveDiskMapping_Task, UnmountDiskMapping_Task, UpdateVsan_Task

AddDisks_Task(addDisks)

Add the set of given disks for use by the VSAN service on this host. Users may use this API to manually add disks for use by VSAN, without specifying an explicit DiskMapping, when the VSAN service not configured to automatically claim storage. Any ineligible disk in the set of given disks and disks which would have exceeded the capacity will be ignored and will not be published in returned result.

Mount a DiskMapping if the specified disk belongs to the unmounted mapping and is of type DiskMapping#ssd.

Upon successful completion of the returned Task, its result field will be populated with a VsanHostDiskMapResult[] and caller must inspect VsanHostDiskMapResult[] to check result for individual DiskMapping.
See QueryDisksForVsan
See autoClaimStorage
See mounted

Required Privileges
Host.Config.Storage

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.
diskHostScsiDisk[]

list of disks to add for use by the VSAN service
See QueryDisksForVsan
See autoClaimStorage
See mounted


Return Value

Type Description
ManagedObjectReference
to a SmsTask
This method returns a Task object with which to monitor the operation.

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None



EvacuateVsanNode_Task(evacuateNode)

Evacuate this host from VSAN cluster.

The task is cancellable.

Required Privileges
Host.Config.Storage
Since
vSphere API 6.0

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.
maintenanceSpecHostMaintenanceSpec

Specifies the data evacuation mode. See HostMaintenanceSpec. If unspecified, the default mode chosen will be ensureObjectAccessibility.
timeoutxsd:int

Time to wait for the task to complete in seconds. If the value is less than or equal to zero, there is no timeout. The operation fails with a Timedout exception if it timed out.

Return Value

Type Description
ManagedObjectReference
to a SmsTask
This method returns a Task object with which to monitor the operation.

Faults

Type Description
InvalidStateThrown if the host is entering maintenance mode or evacuating data.
RequestCanceledThrown if the operation is canceled.
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.
TimedoutThrown if the operation timed out.
VsanFaultThrown if operation fails with VSAN-specific error.

Events

Type
None



InitializeDisks_Task(initializeDisks)

Initialize and use the sets of disks in the given DiskMapping list for the VSAN service on this host. Users may use this API to specify or change disk mappings when the VSAN service is not configured to automatically claim storage. For appending new non-SSDs to an existing DiskMapping, users need to specify only the new non-SSDs with its DiskMapping#ssd.

Mount a DiskMapping if the specified DiskMapping is not mounted in this host.

Upon successful completion of the returned Task, its result field will be populated with a VsanHostDiskMapResult[] and caller must inspect VsanHostDiskMapResult[] to check result for individual DiskMapping.
See QueryDisksForVsan
See autoClaimStorage

Required Privileges
Host.Config.Storage

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.
mappingVsanHostDiskMapping[]

list of disk mappings to initialize
See QueryDisksForVsan
See autoClaimStorage


Return Value

Type Description
ManagedObjectReference
to a SmsTask
This method returns a Task object with which to monitor the operation.

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None



QueryDisksForVsan(queryDisksForVsan)

Queries disks on this host for suitability to use with the VSAN service, and returns the result.
See vim.host.ScsiDisk#canonicalName
Required Privileges
System.Read

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.
canonicalName*xsd:string[]

may be set to restrict the query to the list of HostScsiDisk objects named by the given paths
See vim.host.ScsiDisk#canonicalName
*Need not be set

Return Value

Type Description
VsanHostDiskResult[]A list of populated VsanHostDiskResult entries

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



QueryHostStatus(queryHostStatus)

Queries this host's current runtime status for the VSAN service.
Required Privileges
System.Read

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.

Return Value

Type Description
VsanHostClusterStatusA populated VsanHostClusterStatus entry

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None

Show WSDL type definition



RecommissionVsanNode_Task(recommissionNode)

Recommission this host to VSAN cluster.

Users may use this API to recommission a node that has been evacuated in VsanHostDecommissionMode.
See EvacuateVsanNode_Task
See VsanHostDecommissionMode

Required Privileges
Host.Config.Storage
Since
vSphere API 6.0

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.

Return Value

Type Description
ManagedObjectReference
to a SmsTask
This method returns a Task object with which to monitor the operation.

Faults

Type Description
InvalidStateThrown if the host is not evacuated.
See EvacuateVsanNode_Task
See VsanHostDecommissionMode
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.
VsanFaultThrown if operation fails with VSAN-specific error.
See EvacuateVsanNode_Task
See VsanHostDecommissionMode

Events

Type
None



RemoveDisk_Task(removeDisk)

Remove the set of given disks from use by the VSAN service on this host. Users may use this API to manually remove a DiskMapping#nonSsd from a DiskMapping. This operation is only permitted if the VSAN service on this host is not configured to automatically claim storage.

The task is cancellable.

This method may not be used to remove the last DiskMapping#nonSsd from any given DiskMapping. Removal of the last DiskMapping#nonSsd can be accomplished by using RemoveDiskMapping_Task.

Upon successful completion of the returned Task, its result field will be populated with a VsanHostDiskResult[]. Sets DiskIsLastRemainingNonSSD fault in returned task if specified disk is the last DiskMapping#nonSsd member of DiskMapping.
See RemoveDiskMapping_Task
See UpdateVsan_Task
See autoClaimStorage

Required Privileges
Host.Config.Storage

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.
diskHostScsiDisk[]

list of disks to be removed from use by the VSAN service.
See RemoveDiskMapping_Task
See UpdateVsan_Task
See autoClaimStorage

maintenanceSpec*HostMaintenanceSpec

Any additional actions to move data out of the disk before removing it. See HostMaintenanceSpec. If unspecified, there is no action taken to move data from the disk.
See RemoveDiskMapping_Task
See UpdateVsan_Task
See autoClaimStorage

Since vSphere API 6.0
timeout*xsd:int

Time to wait for the task to complete in seconds. If the value is less than or equal to zero, there is no timeout. The operation fails with a Timedout exception if it timed out.
See RemoveDiskMapping_Task
See UpdateVsan_Task
See autoClaimStorage

Since vSphere API 6.0
*Need not be set

Return Value

Type Description
ManagedObjectReference
to a SmsTask
This method returns a Task object with which to monitor the operation.

Faults

Type Description
RequestCanceledThrown if the operation is canceled.
See RemoveDiskMapping_Task
See UpdateVsan_Task
See autoClaimStorage
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None



RemoveDiskMapping_Task(removeDiskMapping)

Delete given set of disk mappings from use by the VSAN service on this host. This API may be used to remove all disks in a given mapping, including its DiskMapping#ssd. This operation is only permitted if the VSAN service on this host is not configured to automatically claim storage.

The task is cancellable.

Upon successful completion of the returned Task, its result field will be populated with an empty VsanHostDiskMapResult[]. If any errors are encountered, the returned field will instead contain populated error information.
See RemoveDisk_Task
See UpdateVsan_Task
See autoClaimStorage

Required Privileges
Host.Config.Storage

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.
mappingVsanHostDiskMapping[]

list of disk mappings to be removed from VSAN usage.
See RemoveDisk_Task
See UpdateVsan_Task
See autoClaimStorage

maintenanceSpec*HostMaintenanceSpec

Any additional actions to move data out of the disk before removing it. See HostMaintenanceSpec. If unspecified, there is no action taken to move data from the disk.
See RemoveDisk_Task
See UpdateVsan_Task
See autoClaimStorage

Since vSphere API 6.0
timeout*xsd:int

Time to wait for the task to complete in seconds. If the value is less than or equal to zero, there is no timeout. The operation fails with a Timedout exception if it timed out.
See RemoveDisk_Task
See UpdateVsan_Task
See autoClaimStorage

Since vSphere API 6.0
*Need not be set

Return Value

Type Description
ManagedObjectReference
to a SmsTask
This method returns a Task object with which to monitor the operation.

Faults

Type Description
RequestCanceledThrown if the operation is canceled.
See RemoveDisk_Task
See UpdateVsan_Task
See autoClaimStorage
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None



UnmountDiskMapping_Task(unmountDiskMapping)

Unmount the mounted DiskMapping. An unmounted volume cannot be used for any VSAN operations. In contrast to RemoveDiskMapping_Task, this operation does not destroy or alter VSAN data on the disks. AddDisks_Task and InitializeDisks_Task can be used to re-mount the diskMapping.

In case of shared-SAS, where diskMappings are visible to more than one VSAN hosts, Users may use this API to manually unmount and re-mount diskMappings.

Upon successful completion of the returned Task, its result field will be populated with VsanHostDiskMapResult[]. If any errors are encountered, the returned field will instead contain populated error information.
See RemoveDiskMapping_Task
See AddDisks_Task
See InitializeDisks_Task

Required Privileges
Host.Config.Storage
Since
vSphere API 6.0

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.
mappingVsanHostDiskMapping[]


See RemoveDiskMapping_Task
See AddDisks_Task
See InitializeDisks_Task


Return Value

Type Description
ManagedObjectReference
to a SmsTask
This method returns a Task object with which to monitor the operation.

Faults

Type Description
InvalidStateThrown if the DiskMapping is already unmounted.
See RemoveDiskMapping_Task
See AddDisks_Task
See InitializeDisks_Task
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.
VsanFaultThrown if operation fails with VSAN-specific error.
See RemoveDiskMapping_Task
See AddDisks_Task
See InitializeDisks_Task

Events

Type
None



UpdateVsan_Task(update)

Update the VSAN service on this host according to the given host configuration specification.

Enabling and disabling the VSAN service can be achieved by using the enabled flag. Host storage settings can be specified through use of storageInfo. If this value is omitted, changes will not be made to the existing storage configuration. Host cluster settings can be specified through use of clusterInfo. If this value is omitted, changes will not be made to the existing cluster configuration. Host network settings can be specified through use of networkInfo. If this value is omitted, changes will not be made to the existing network configuration.
See VsanHostConfigInfo
See storageInfo
See clusterInfo
See networkInfo
See QueryDisksForVsan

Required Privileges
Host.Config.Storage

Parameters

NameTypeDescription
_thisManagedObjectReference A reference to the HostVsanSystem used to make the method call.
configVsanHostConfigInfo

host configuration settings to use for the VSAN service.
See VsanHostConfigInfo
See storageInfo
See clusterInfo
See networkInfo
See QueryDisksForVsan


Return Value

Type Description
ManagedObjectReference
to a SmsTask
This method returns a Task object with which to monitor the operation.

Faults

Type Description
RuntimeFaultThrown if any type of runtime fault is thrown that is not covered by the other faults; for example, a communication error.

Events

Type
None